User guide

Dynamix DW-E
17
Figure 2.2-2
Step 3: When screen shows “Setup network configuration successfully!”
It means the IP Network setting is successfully changed as figure 2.2-
3.
☻Note: “Network Control” takes around 5-second to apply the new
network configuration. Please logon again with new IP address
after 5 seconds.
System Time Configuration
Step 1: When re-logon to the new IP address; the next is to setup the system
time zone. Click Control > System Time Zone to setup the system
time zone as figure 2.3-1.
Figure 2.2-3
Figure 2.3-1