User guide

Dynamix DW-E
15
Chapter 2 Logon Dynamix DW-E
After connected E1/T1 & Ethernet cables into the Dynamix DW-E,
turned on the power. The first step is to logon the system and set up the IP
address.
Before you can use the Browser to config Dynamix DW-E, you need to
have Java Standard Runtime (1_4_1_02) to make it work. Please refer to
Appendix 2 Java plug-in Install for detail.
Logon Dynamix DW-E
Setp1: Start IE5.0 (or later version) to navigate Dynamix DW-E Management
System by typing the default IP addresses (the default URL is
http://192.168.111.111:10087). The screen will display User ID and
Password as figure 2.1-1.
☻Note: The default network IP address is 192.168.111.111 and subnet
mask is 255.255.255.0
Step 2: Enter log user name and password (the default user id is root and
user password is root). You can manage your user account via web
(refer to Section “Account Manager”) later.
Step 3: The screen shows the Home Page of Dynamix DW-E as figure 2.1-3.
Figure 2.1-1
Figure 2.1-2