User`s manual

Advanced Setting Label

Network Setup Label

WAN Setting

Sets/changes the WAN port Type like “Fixed IP”, “DHCP Client”

or ”PPPoE”.

LAN Setting

Modifies the IP address of the LAN port and setting DHCP Server

parameters.

Virtual Server

Remote user can access server such as Web or FTP at you local site

via public IP address can be automatically redirected to local servers

configured with private IP address.

Dynamic DNS

Dynamitic DNS allows you to provide Internet users with a domain

name to access your server.

Network Parameters

Network Parameter allows you to modify the access port of gateway.

For example :

Setting HTTP port : 8080

Setting TELNET port is : 8081

(Default HTTP :80, TELNET: 23)

VoIP Setup

VoIP Basic

The S Series Gateway support 2 / 4 / 8 / 16 / 24 phone/line for SIP

and H.323 VoIP call applications. You can configure these ports from

this menu.

Dialing Plan

Users could apply any dial policy by setting Dial Plan including

outgoing dial plan and incoming dial plan.

Advanced Setting

VoIP Gateway support for silence compression, DTMF Relay, Codec

Selection, FAX mode Option,

H323 Register Type and H.323 Fast-Start/Normal-Start function.

FXO AC impedance, Volume Adjustment, RRQ TTL, RFC2833

Payload, IP TOS,..etc

Hot Line Setting Let user can set up “hotline” to dial the phone number automatically.

Port Status Display the telephone interface status

Traffic Monitor Display and Monitor the voice traffic and data traffic.

System Administration: