User`s manual

13
S200/S400(GW/GK/SVR) Series & C400 Call Manager
Item Port Description
1 FXS(Foreign Exchange Station) Connect to Phone with RJ-11 (Black) analog line.
FXS port was connected to your telephone sets, FAX,
or Trunk Line of PBX.
2 FXO(Foreign Exchange Office) Connect to PBX or CO line with RJ-11(Write) analog
line. FXO port was connected to the extension port of
a PBX or directly connected to a PSTN line of carrier.
3 WAN(Wide Area Network) Connect to the network with an Ethernet cable. This
port allows your GW to be connected to an Internet
Access device, e.g. router, cable modem, ADSL
modem, through a networking cable with RJ-45
connectors used on 10BaseT and 100BaseTX
networks.
4 LAN(Local Area Network) Connect to PC with Ethernet cable. 4 ports allow your
PC or Switch/Hub to be connected to the GW through
a networking cable with RJ-45 connectors used on
10BaseT and 100BaseTX networks.
5 RES(Reset button) The reset button, when pressed, resets the cable
voice gateway without the need to unplug the power
cord.
Push this button until 5 seconds, and GW will be set
to factory default.
6 AC power(DC in 12V) A power supply cable is inserted.
The supplied power adapter converts
110V or 220V AC to DC as required for this device.
*there is no FXO port in Call Manager