User manual

Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual
3.7 Phone Pattern
This WEB will show the tone generation value from this unit. Please don’t
configure it if you got some correct value for sure. (see figure 3.9)
Figure 3.9: Phone Setting
m Ring Cadence – TO configure the frequency and cadence for the local ring
tone. The cadence is for ms.
m Ring Back Tone – To configure the value of the local ring back tone
generation
m Busy Tone – To configure the value of the local busy tone.
m Dial Tone – To configure the value of the local dial tone.
m 2
nd
Dial Tone – To configure the value of the local 2
nd
dial tone.
m Flash Frequency – To configure the High and Low frequency for the Flash
sending.
45