User manual

Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual
3.6 Voice Setting
Users could configure the voice codec or gain level in this web page.
Please get more detail info from the following description. (see figure 3.8)
Figure 3.8: Voice Setting
m Codec Priority – This could help users configure the codec priority for using.
Please pay more attentions about the firmware you use. If the firmware
only support G.729 series codec, the G.723 codec in this table will be
useful.
m Frame Size – To configure the packet size for the codec that users want.
m G723 Silence Suppression – To enable the VAD and CNG function for the
G.723 codec.
m Line1 (TEL 1) Volume – To configure the output gain (voice), input gain
(input) and DTMF gain (DTMF) of the first FXS port.
m Line2 (LINE 1) Volume – To configure the output gain (voice), input gain
(input) and DTMF gain (DTMF) of the first FXO port.
m Line3 (TEL 2) Volume – To configure the output gain (voice), input gain
(input) and DTMF gain (DTMF) of the second FXS port.
43