User manual

Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual
40
3.5 System Configuration
Figure 3.7: System Configuration
m Keypad Type – User could define the keypad for the DTMF sending.
f In-Band : The DTMF signal sending by RTP.
f Out-Band : The DTMF signal sending not by RTP. Including the
H.245(Alpha), H.245(Signal), Q.931 and RFC 2833.
m Inter Digit Time – The call will be sent out if user didn’t enter the digits after
this timer. From 1 to 10.
m Forward time – It supports the No Answer Forward function. If users
configure it for 10, the call will be forwarded when it rings about 10 seconds.
From 5 to 65535.
m Prefix – This will be added in the first digits of the numbers that users had
dialed.
m Prefix Switch – Users could enable or disable this function.
m Prefix Disable Digits – Users could enter this digits for disable this function
in this dialing.
The Prefix, Prefix Switch and Prefix Disable Digits is a function. Users have to
configure these three tables if this function is needed.