User manual

Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual
m SNTP – Enable the SNTP server registering function if user wants to get
the correct time from the Command Line Interface.
m SNTP Server Address – Enter the correct ip address of the SNTP server or
get the incorrect time from the Command Line Interface.
m GMT – Configuring the time area for the time display in the Command Line
Interface.
m IP Sharing – Enable this function if the gateway is behind the IP sharing
device.
m IP Sharing Server Address – Enter the WAN IP address of the IP sharing
device if it is the fixed ip.
m IP Change – Enable this function if the WAN IP address of the IP sharing
device is dynamic address.
The IP change function could support the GK from Asotel only. Please
pay more attentions about this function if your IP sharing device is
using the dynamic IP address.
m PPPoE User Name – Put the PPPoE connection account in this table.
Please get this info from your ISP.
m PPPoE Password – Put the PPPoE connection password in this table.
Please get this info from your ISP.
m PPPoE IP Address – After the connection success, this table will show you
the IP address which the gateway got from the ISP.
m PPPoE Destination – After the connection success, this table will show you
the default gateway address, which the gateway got from the ISP.
m PPPoE DNS primary – After the connection success, this table will show
you the DNS ip address from the ISP.
m Reboot After Remote Host Disconnection – Enable this function will make
the gateway restart automatically if the PPPoE connection is disconnected
or the IP address was taken back by the ISP.
34