User manual

Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual
-ring to set RING tone value.
The played tone type, when Gateway is receiving a call.
-rbt to set RingBackTone value
The played tone type, when Gateway receives a Q.931 Alerting
message. In condition that Gateway is the originate side.
-bt to set BusyTone value.
The played tone type, when destination is busy.
-dt to set DialTone value.
The played tone type, when hook off a phone set of workable
Gateway.
-flash set the detective flash range in ms, for example, 300-500 ms.
4.2.19 [tone]
This command is basically for FXO ports.
-----------------------------------------------------------------------------------------------
usr/config$ tone
Disconnect tone and remote ring back tone configuration
Usage:
tone [num][freqHi ][freqLo ][freqHiLev][freqLoLev]
[Tone1ON][Tone1OFF][Tone2ON ][Tone2OFF ]]
tone -print Display disconnect tone configuration.
[num] Tone index(1~4:Disconnect tone / 5~8:Remote ring back
tone).
Example:
tone -print
tone 1 620 480 8 8 50 50 1023 1023
usr/config$
Parameter Usages:
-print show all tone configuration
104