User guide

Change Default Time setting:

Step 4: When re-logon to the new IP address, the next is to setup the system

time zone. Click Device Setting > Time to setup the system. Enter the

current SNTP server, time zone and daylight saving parameters. Apply the

change by clicking Apply button. (See figure 1-6-4 Time setting)

Figure 1-6-4 Time setting

Modify SIP Account Parameter:

it is necessary for VOIP calling . Click SIP trunk and new to create the

required sip trunk. Enter the trunk ID to 1 and input those SIP parameters.

Apply the change by clicking Apply button. (See Figure 1-6-5 SIP Trunk)

Figure 1-6-5 SIP Trunk

Maintenance > Maintenance > Soft-Reset or Reboot to take effect.

Apply the change by clicking Apply button. (See Figure 1-6-6 Quick-Reset)

Step 6: After modify basic setting. It is required to reset FXO-04. Click

Step 5: The next step is to add a SIP trunk for VOIP calling. For Dynamix 2540,

Soft Reset

Dynamix FXO-04: