User guide

See figure 19. FXO Gateway Caller ID Mode.

Figure 20. FXO Telephone Number.

Figure 21.

Go to FXS Setting



FXS Line



Caller ID Mode to select Transparent to

enable Caller ID generation. After enable this command, analog telephone set

is able to display Caller ID either FXS phone number (at this example, they are

501 to 504) or display number which were sent from FXO gateway ( PSTN, SIP

Trunk or FXO Line number).

Step 3: Enable Caller ID generation at Dynamix 2504 FXS gateway. See