User guide

70
Step 5: Set Route Plan to each FXO line.
Disable the “VOIP Default Route” first.
Figure 12.
Set the Incoming Call Type to VOIP; Matched Prefix number from 1001 to
1004; Matched Length to 0 and Outgoing Type to FXO. See Figure 12.
For example: Configure Route Plan to each line of FXO Gateway.
a. Line #1 of FXO Gateway setting, see Figure 13.
An FXS port 1 incoming call routes to FXO port 1 configuration example.
Incoming Call Type : VOIP
Matched Prefix : 1001
Matched Length : 0
No Answer Timeout : 30 (MUST be longer than 10 seconds).
Outgoing Type : FXO
Hunting Type : selected anyone.
Routing List : 01. Line 1 ; 02. None. ; 03. None ; 04. None.
Routing List is going to select the first priority of Line number 1 to 4. At this
application, Only Line 1 is allowed to connect with remote FXS telephone 1.