User guide

64
FXS port #1 point to remote FXO port #1 directly. Continue to configure
FXS port number 2 to 4 as following example at Modify Line Setting
web page. See Figure 5.
(This command let FXS port #2 point to remote FXO port #2 directly.)
(This command let FXS port #3 point to remote FXO port #3 directly.)
(This command let FXS port #4 point to remote FXO port #4 directly.)
Step 4: Go to Modify Line Setting webpage (See Figure 5) of FXS gateway at
Port #1 (LINE ID 1) to continue setting of port #1.
Select Register Type to “predefine”. Enter FXS port #1 information as
follows.
TEL No : 501
User ID : 501
User password: 501
Display Name: 501
Enter FXS port #2 information as follows.
TEL No : 502
User ID : 502
User password: 502
Display Name: 502
Enter FXS port #3 information as follows.
TEL No : 503
User ID : 503
User password: 503
Display Name: 503
Enter FXS port #4 information as follows.
TEL No : 504
User ID : 504
User password: 504
Display Name: 504
Step 5: Select HOT Line to Enable at webpage (See Figure 5) of Line Setting
port #1 number.
For example:
The FXS port 1 number is 501, FXS port 2 is 502, FXS port 3 is 503, FXS port
4 is 504.
FXS port 1 number 501 hotline to FXO SIP Trunk 1 which number is 1001,
field to 1001 which is Dynamix 2540 FXO port 1 number. This command let
Enter HOT LINE TEL field to 1002 which is
Dynamix 2540 FXO port 2 number.
Enter HOT LINE TEL field to 1003 which is Dynamix 2540 FXO port 3 number.
Enter HOT LINE TEL field to 1004 which is Dynamix 2540 FXO port 4 number.
at FXS Gateway. And enter HOT Line TEL at 1001 which is
Dynamix 2540 FXO