User guide

60
Appendix B --- HTTP auto provisioning
Get the http provisioning packet from Welltech and start the provisioning as
follows:
Step 1: build mac list for mass configuration file generation
For FXO>
following:
Siptk1.displayname ~ siptk4.displayname: display name for each line
Siptk1.userid ~ siptk4.userid: user id for register to SIP proxy for each line
siptk1.password ~ siptk4.password: user password for register to SIP
proxy for each line
Siptk1.telno ~ siptk4.telno: tel no for each line
Please save and close it.
Step 2: create a template configuration file
Open the “Welltech 2540 Parameter.txt” getting from Welltech and make the
required change. Please at least make the changes for those provisioning and
SIP proxy settings. For detail, please refer the comments of “wg2540
Parameter.txt”.
Step 3: Make the change for wegencfg.ini as follows if necessary
# Template File
BaseFile=.\Welltech 2540 Parameter.txt
# MAC list file
ListFile=.\Welltech 2540 MAC.csv
# 0: Off, 1: On
Encrypt=0
Step 4: Generate the individual configuration file.
Double click the “wtgencfg.exe”, it will generate the configuration file for
each MAC list in “MAC address.cfg” as the following pictures.
The Dynamix 2540 MAC.csv contains most frequently changed parameters as
MACAddress: Dynamix 2540 MAC Address