User guide

10
Figure 1-6-6 Quick-Reset
Step 7: After soft-reset or reboot.
>Click Status > SIP Trunk Status to check whether registered or not. (See
figure 1-6-7 SIP trunk status)
Figure 1-6-7 SIP trunk status
1. For PSTN incoming call, the caller will hear a dial tone. Then the caller can
dial a VOIP number and it will use the setup SIP Trunk 1 to make SIP call
out. (2 stage dialing)
PSTN.
Check Dynamix FXO-04 Registered Status:
For FXO (
Dynamix 2540):
2. For VOIP incoming call, Dynamix 2540 will off hook a FXO port and dial to
Through the above settings, the FXO-04 should able to do the following: