User manual

Dynamix DW-2/4 FXO SIP Gateway User Manual

application code, greeting file, askpin file.

-s to specify TFTP server’s IP address when upgrading ROM files.

-f to specify the target file name, which will replace the old one.

-method to decide using TFTP or FTP as file transfer server. “0” stands for

TFTP, while “1” stands for FTP.

-ftp if users choose FTP in above item, it is necessary to specify

pre-defined username and password when upgrading files.

4.2.24 [passwd]

For security concern, users have to input the password before entering

configuration mode. “passwd” command is for password setting purpose.

----------------------------------------------------------------------------------------------

usr/config$ passwd

Password setting information and configuration

Usage:

passwd -set Loginname Password

passwd -clean

Note:

1. Loginname can be only 'root' or 'administrator'

2. passwd -clean will clear all passwd stored in flash,

please use it with care. Example:

passwd -set root Your_Passwd_Setting

usr/config$

Parameter Usages:

-set

(passwd –set “login name” “password”)

Note : “login name” can be “root” or “administrator” only. “root” and

“administrator” have the same authorization, except some commands

that can be executed by “root” only – “passwd –clean”, “rom –boot”,

”rom –bot2m” and “flash –clean”.