User manual

Dynamix DW-2/4 FXO SIP Gateway User Manual
[-rtpreliab mode] tos
-print
Example:
tos -rtptype 7 -sigtype 0
Parameter Usages:
-rtptype the packages of voice
-sigtype the package of call signal
Note:
The value of rtptype and sigtype is from 0 to 63.
It’s working if it supported by your network.
4.2.22 [pt]
RTP payload type configuration and information
----------------------------------------------------------------------------------------------
usr/config$ pt
RTP payload type configuration and information
Usage:
pt-print Display the RTP payload type information
-rfc2833 Configure the DTMF RFC2833 payload type
-dtmf Configute the DTMF payload type
-fax Configure the FAX payload type
-faxbypass Configure the FAX ByPass payload type
-modembypass Configure the MODEM ByPass payload type -
redundancy Configure the Redundancy payload type -
modemrelay Configure the MODEM Relay payload type
Example:
pt -rfc2833 96 -fax 101
usr/config$ Users could configure the payload type for this
function.
82