User manual

Dynamix DW-2/4 FXO SIP Gateway User Manual
------------------------------------------------------------------------------
In this example means: if there is a incoming call from PSTN into
the port 1, gateway will automatically dial out the number “1001”.
4.2.14 [route]
This command is to set routing table for Gateway.
usr/config$ route
Routing table information and configuration
Usage:
route -add [prefix number][dst number][e164 number]
[min number][max number][hunt number] route -delete
index route -modify index [prefix number][dst number][e164
number]
[min number][max number][hunt number]
route -ip [dst number][SIP number] route -fxo [dst
number][SIP number] route -print Routing table
information.
prefix The prefix of dialed number.
dst Destination port(FXO:1/IP:2).
e164 Destination e164 number(when destination is FXO).
min Min digits.(0 ~ 255)
max Max digits.(0 ~ 255)
hunt Hunt method for busy forward(NONE:0 / GROUP:1 / ALL:2)
Example:
route -add prefix 100 dst 1 e164 1001 min 1 max 3 hunt 1
route -ip dst 1 e164 1001 route -fxo dst 1 e164 x
route -modify 1 prefix 100 dst 0 e164 1001 min 1 max 3 hunt 1 route -
delete 1 usr/config$
Parameter Usages:
-print print out all routing table information
-add add a routing rule in routing table. User can add less than 50 rules.
(route –add prefix “prefix number” dst “destination port type”
e164 “SIP number of port” min “minimum digits needed” max
65