User manual

Dynamix DW-2/4 FXO SIP Gateway User Manual

3.12 IP Packet ToS

The Type of Service should be worked with the network router. The router will

check all the packets if it support the TOS function. There is a field in the packet

for the TOS value. This WEB is for users to configure these values to make the

packets with the correct values for the TOS service from the gateway. (see

figure 3.18)

Figure 3.18:TOS Configuration

According to the RFC 1349 document, the TOS value as following :

1000 – minimize delay 0100 –

maximize throughput 0010 –

maximize reliability 0001 –

minimize monetary cost 0000 –

normal service

These values are the Binary format. Please change to the Decimal and put

these values in to the correct table.