User manual

Dynamix DW-2/4 FXO SIP Gateway User Manual
3.10.1 Add a new Routing Table
1 The default setting is changed after you press the Change Default
button.
Please press the Routing Table button again to show the new setting. (see
figure 3.15)
FIGURE 3.15: EDIT AND ADD A NEW ROUTING TABLE
♦ Index - Define the number of this data.
♦ Prefix - Define the number you dial. You could just define the first digit of
the numbers
♦ Destination - Define the destination of this rule. There are three directions
of the destination.
♦ E164 - Define a right E164 number of the destination you want.
For example: There are two FXO ports of the gateway (2S2O) and I want the
first FXO port (1002 is the default E164 number) to be the destination. So the
E164 number I have to define is 1002.
♦ Min Digits - The minima digits you dial.
♦ Max Digits - The maxima digits you dial.