User manual

Dynamix DW-2/4 FXO SIP Gateway User Manual
Steps in configuration
STEP 1
Start Up
To check out the peripheral equipments and
understand the feature of this gateway. Please read
this step very carefully before starting the configuring.
Connecting the gateway and computer to start
configuring by WEB GUI.
STEP 2
How to
Setup and
Connect
basically
Setting the ip address for this gateway to make sure that
it could connect with the internet.
Setting the configurations of dialing, including the Peer-
To-Peer, GK mode and how to set these tables to make
calls by this gateway easily. The other configurations of
make call will be discussed in this step.
STEP 3
Advanced
Advanced configurations and special functions of this
gateway. Using the WEB GUI to show how to set this
table and explain the meaning of these tables.
To explain the meaning of the command in the command
line interface and example the usage of the command.
To get more usages or configuration in this step and
study about the command line configuration.
з