User manual

Dynamix DW-2/4 FXO SIP Gateway User Manual

2.4.2 Configure the gateway into the Proxy mode

Figure 2.17: Configure the Proxy info

2 Press the OK button that is on the bottom of this page to save the

configuration.

3 Switch to the Security Config page and put the user account and

password in the correct table. Please get this info from your ITSP. Press the

OK button if the configuration is finished. (see figure 2.20)

1 Enter the SIP configuration table and change the mode from Peer-to-Peer to

Proxy mode. To change the Proxy information from your service provider (Ex. The

Proxy IP, Outbound Proxy IP and Registered Number)