User`s manual

29
Port 1: FXO was connected to PSTN.
Port 2: FXO was connected to PSTN.
Port 3: FXO was connected to PSTN.
Port 4: FXO was connected to PSTN.
H.323 number “123”call incoming, Port 1 will be off-hook and hear the Dial Tone from
PSTN.
If Port 1 is busy, Port will be will be off-hook and hear the Dial Tone from PSTN.
If Port 1 and 2 are busy, Port 3 will be off-hook and hear the Dial Tone from PSTN.
If Port 1, Port 2 and Port 3 are busy, Port 4 will be off-hook and hear the Dial Tone from
PSTN.
(Note: “123” will be register to H.323 Gatekeeper when Gateway when
Registering H.323 Gatekeeper Mode)
Example3: Termination Call to FXO for One-Shoot Call
Port 1: FXO was connected to PSTN (area code is 81xxxxxxxx).
H.323 leading number “081x”incoming, and delete the first one digit “0”, and call to
PSTN number.
(Note: “081x” will be register to H.323 Gatekeeper when Gateway when
Registering H.323 Gatekeeper Mode)
In the “PSTN Route Dial Plan Configurations” settings: Maximum Entries : 20
“Inbound number” is the leading digits of the dialing number.