User`s manual

this Gateway is not registered to any H.323 Gatekeeper or any SIP Proxy Server. This setting can

also assign some dialing plan to local ports (including prefix strip, prefix addition).

Through this setting, user can directly map a number to a specific gateway (IP address).

In the “Outgoing Dial Plan” settings:

“Leading Number” is the leading digits of the dialing number.

“Min Length” and “Max Length” is the min/max allowed length you can dial.

“Strip Length” is the number of digits that will be stripped from beginning of the dialed

number.

“Prefix Number” is the digits that will be added to the beginning of the dialed number.

“Destination” is the IP address of the destination Gateway that owns this phone number.

Step 5: Finishing the Wizard Setup

After completing the Wizard Setup, please click “Finish” bottom. The VoIP Gateway will save the

configuration and rebooting Gateway automatically. After 20 Seconds, you could re-login the

Gateway.

4 Advanced Setup

In Advanced Setup, GW provides user two major parts function to configure:

One is “Network Setup”, the other one is “VoIP Call Setup”