User`s manual

14
Management Label
Save Configuration
You can save configuration and restart the gateway with the default
configuration or with
the current running configuration.
Access Control Users can Sets/changes the administrator password..
Set to Default You can restart the gateway with the default configuration.
Backup/Restore
Configuration
User can backup the configuration file of Gateway to PC or Restore the
configuration file from PC.
System Information
Display Software version, WAN Type, VoIP Status, VoIP Codec, Phone
Interface and System Tim.
SNTP Setting
SNTP (Simple Network Time Protocol) Configuration for synchroniz
ing
gateway clocks in the global Internet.
Syslog Setting
Gateway can sends log information to Syslog Server by UDP ports
514.
Capture Packets
The gateway supports packets capture and save the packets to your
PC. User can use Network Protocol Analyzer “Ethereal” to analysis the
packets. (Free down load from http://www.ethereal.com)
1
3 Wizard Setup for Quick Start
Wizard Setup
After finishing the authentication, the Main menu will display 3 parts of configuration,
please click “Wizard Setup” to enter quick start:
3.1 WAN Port Type Setup (Setup First)
For most users, Internet access is the primary application. The N/T Series Gateway suppor
t the WAN interface for Internet access and remote access. The following sections will explai