User manual

registered to Gatekeeper when it is set as Gatekeeper
Mode.
2. LED flash means Dynamix DW-0002/H is not registered to
Gatekeeper when it is set as Gatekeeper Mode.
3. Or when Dynamix DW-0002/H is in downloading mode,
LED should be flash as well.
4. Light off means Dynamix DW-0002/H is in Peer-to-Peer
Mode.
Back panel:
1.4.2 Dynamix DW-0004/H
Front panel: The LED light provides system message of FXO GateWay.
Power : Light on means FXO GateWay is power on.
L1-L4 : Light on means the line is in use.
Link : Light on means FXO GateWay is connected to the network
correctly.
Act : LED should be light on and in flash display when data is
transmitting.
Ready : 1. Light on and in slow flash means FXO GateWay is in
operation mode.
Status : 1. Light on means FXO GateWay successfully registered to
Gatekeeper when it is set as Gatekeeper Mode.
2. LED flash means FXO GateWay is not registered to
7