User manual

4.2.6 [commit]
Save changes after configuring the FXO GateWay.
-------------------------------------------------------------------------------------------------
usr/config$ commit
This may take a few seconds, please wait....
Commit to flash memory ok!
usr/config$
Note: Users should use commit to save modified value, or they will not be
activated after system reboot.
4.2.7 [ifaddr]
Configure and display FXO GateWay network information.
usr/config$ ifaddr
LAN information and configuration
Usage:
ifaddr [-print]|[-dhcp used]|[-sntp mode [server]]
ifaddr [-ipsharing used [deviceAddr]][-cmcenter ip address]
ifaddr [-ip ipaddress] [-mask subnetmask] [-gate defaultgateway]
-print Display LAN information and configuration.
-mode Specify WAN IP mode (0=Static, 1=DHCP, 2=PPPoE)
-ip Specify ip address.
-mask Set Internet subnet mask.
-gate Specify default gateway ip address
-dns Set DNS server IP address. Provide set DNS primary and secondary IP address
(1=primary IP address, 2=secondary)
-http Set HTTP server port.
-sntp Set SNTP server mode and specify IP address.
-DNS Set DNS sever IP address
-timezone Set local timezone.
-ipsharing Specify usage of an IP sharing device and specify IP address.
- ipchange Replace IP address if the shared IP is changed (0=Disable,
72
1=Enable)