User manual

3.24 Routing Table
Routing Table is a rule to define the destination of the calls you make. You could
define the rules by the number you dial or by the ports. The Routing Table
button will show you the configuration table. (see figure 3.28)
In fact, there are three directions of the incoming calls (from IP or FXO side).
The explanation of the default routing is as below:
The location with
the incoming calls
The location with
the destination
The explanation
IP (Default) Fxo
The destination will be the FXO port
when the calls from the IP side
without any define rules.
Fxo (Default) IP
The destination will be the IP side
when the calls from the FXO port
without any define rules.
Figure 3.28: Routing Table
 Index – The list number of the Route Table.
 Default – For change the default setting. Users have to pick the direction
for the default setting changed.
 Prefix – The prefix number for the dialed digits. The call will be followed this
60