User manual

3.10 RTP Pay Load Type Configuration

There are more types for the RTP Payload. This web page could support users

define the Payload Type for some special payload. (see figure 3.12)

Figure 3.12: Pay Load Type Configuration

 RFC2833 Payload Type – To define the payload type for RFC2833 type.

 DTMF Payload Type – To define the payload for the DTMF type.

 FAX Payload Type – To define the payload for the FAX type.

 FAXByPass Payload type – To define the payload for the FAX by Pass

type.

 MODEMByPass Payload Type –To define the payload for the Modem by

Pass type. (This is no use for the hardware as so far.)

 Redundancy Payload Type – To define the payload for the Redundancy

type.

 MODEMRelay Payload Type – To define the payload for the FAX by Pass

type. (This is no use for the hardware as so far.)

Please contact with your vendors if you want to configure these values.