User manual

3.2 Network Interface

Users have to configure the Network configurations in this page. This gateway

will be work while it is connecting with the internet network. Please get more

info from the following descriptions. (see figure 3.4)

Figure 3.4: Network Interface

 IP Mode – To configure the fixed or dynamic ip address for this unit. Please

configure to PPPoE if the ADSL is using the PPPoE type.

 IP Address – Define the ip address for your networking if it is the fixed ip.

Please get this info from your ISP.

 Subnet Mask – Define the mask address for your networking. Please get

this info from your ISP.

 Default Gateway – Define the default gateway for your networking. Please

get this info from your ISP.

 NAT function switch – To enable or disable the NAT function.

 LAN port IP for NAT – To configure the lan port ip for the NAT device.

 The configuration of NAT function and LAN port ip configuration could

support the the NAT model only.

 DNS primary – To configure the first ip address for the DNS server.

 DNS secondary – To configure the second ip address for the DNS server.

 HTTP Port – To configure the HTTP port for access this unit from the