User manual

[-modify index [passwd number][direction number]]
[-delete index]
fxopwd -print Display FXO password information and configuration.
-add Add new FXO password record
passwd The password.
direction FXO direction(0=Out, 1=In, 2=Both).
-modify Modify FXO password record
passwd The password.
direction FXO direction(0=Out, 1=In, 2=Both).
-delete Delete index
Example:
fxopwd -add passwd 1234 direction 0
fxopwd -modify 1 passwd 1234 direction 2
fxopwd -delete 1
usr/config$
Parameter Usages:
-print show all FXO password configuration
-add add 1 set of FXO password
-delete delete 1 specific set of FXO password
-modify modify 1 specific set of FXO password
passwd password
direction the direction number which password implement. 0 means the
calls from IP side to PSTN side, 1 means the calls from PSTN side
to IP side, 2 means both sides. Once user enables FXO password
function, caller will be asked to enter password when call in PSTN
side or IP side according to the direction of password being
implemented. (fxopwd –a passwd “password” direction 0/1/2)
Note:
User can set total 10 sets of password, no matter what the
direction is.
4.2.21 [record]
User can record greeting and askpin file and analyze tone frequency by
95