User manual

sequence number as index.
-add add a new record to phone book. When adding a record, users
have to specify name, ip, and e164 number to complete the
command.
name name to represent callee.
e164 e.164 number for mapping with IP address of callee
ip ip address of callee
port call signal port number of callee
drop drop e.164 number when dial out. 0 means to keep e.164 number,
1 means to drop e.164 number when dialing out.
insert insert digits.(1~10 digits)
-modify modify an existing record. When using this command, users have
to specify the record’s index number, and then make the change.
-delete delete a specific record. “pbook –delete 3” means delete index 3
record.
PhoneBook Rules:
The e164 number defined in phone book will fully carry to destination. It is
not just a representative number for destination’s IP Address. In other
words, user dial this e164 number to reach destination, destination will
receive the number and find out if it is matched to its e164, including Line
number in some particular device.
4.2.15 [voice]
The voice command is associated with the audio setting information.
There are four voice codecs supported by Gateway.
-----------------------------------------------------------------------------------------------
usr/config$ voice
Voice codec setting information and configuration
Usage:
voice [-print]
[-send [G723 ms] [G729 ms] [G729A ms] [G729B ms] [G729AB ms] [G711U ms] [G711A
ms] ]
voice [-priority [G723] [G729] [G729A] [G729B] [G729AB] [G711U] [G711A] ]
86