User manual

-gkfind Gatekeeper finding port (1024~65535).
-gkras Gatekeeper RAS port (1024~65535).
-h225 H225 ras port (1024~65535).
-q931 H225 call signal port (1024~65535).
-dstq931 Destination H225 call signal port (1024~65535).
-range Dynamically allocated port range (1024~19999).
-respto Max waiting time for 1st response to a new call (1~200).
-connto Max waiting time for call establishment after receiving 1st
response of a new call (1~20000).
Note:
Range of IP address setting (0.0.0.0 ~ 255.255.255.255).
Example:
h323 -gk 210.59.163.171 -line1 70 -line2 71 -line3 72 -line4 73
h323 -alias Your_Alias_Name -gkid GK -gkdis 1 -passwd 1234
h323 -range start 1024 end 19999 pbook -add name Test ip 210.59.163.202 e164 1001
pbook -insert 3 name Test ip 210.59.163.202 e164 1001
pbook -delete 3
pbook -search ip 192.168.4.99
pbook -modify 3 name Test ip 210.59.163.202 e164 1001
usr/config$
Parameter Usages:
-print print current h323 related settings
-mode alternatives for gatekeeper or peer-to-peer mode (0=gatekeeper
mode; 1=peer-to-peer mode). If users select gatekeeper mode, a
valid gatekeeper is needed when Gateway is in operation.
usr/config$ h323 –mode 1 (peer to peer mode)
-gk to assign gatekeeper’s IP address when Gateway is in gatekeeper
mode.
-algk assign second gatekeeper’s IP address as redundancy. If
Gateway fails to register to main GK for 10 time, it will try to
register to alternative GK.
-gwtype gateway type has two kinds, gateway and terminal. Gateway
type – device will register as H.323 defined Gateway, user has to
79