User manual

-id PPPoE connection user name
-pwd PPPoE connection password
-reboot Reboot after remote host disconnection in PPPoE mode
(0=No Reboot, 1=Yes Reboot)
Note:
Range of ip address setting (0.0.0.0 ~ 255.255.255.255).
Example:
ifaddr -mode 0
ifaddr -ip 210.59.163.202 -mask 255.255.255.0 -gate 210.59.163.254
ifaddr -dns 1 168.92.1.1 -dns 2 168.95.1.2
ifaddr -http 80
ifaddr -sntp 1 210.59.163.254
ifaddr -ipsharing 1 210.59.163.254
ifaddr -ipchange 1
ifaddr -id [e-mail] -pwd 123456 -reboot 1
ifaddr -timezone 8
ifaddr -dns primary secondary
usr/config$
Parameters Usage:
-print print current IP setting
-mode Define the network mode for this unit.
-ip assign IP address for Gateway
-mask assign internet subnet mask
-gate assign IP default gateway
-dns configure the IP address for the DNS server
usr/config$ ifaddr –dns 1 123.123.123.123
usr/config$ ifaddr –dns 2 123.123.123.125
-http Change the http port. User can change default HTTP port (80) to
another one for security or NAT application.
-timezone set local time zone according to GMT
73
-ipsharing Just put the static IP address for the WAN port of the IP sharing if
the gateway is behind this IP sharing device.