User manual

Tone2 off : 1023
Disconnect tone 4 paramter
Frequency high : 473
frequency low : 473
frequency high level : 8
frequency low level : 8
Tone1 on : 25
Tone1 off : 25
Tone2 on : 50
Tone2 off : 50
(Confirm the values is correct or not)
(Key in the commit and reboot command if you finish the procedures as above)
4.2.22 [ddns]
The dynamic DNS service information and configuration
-------------------------------------------------------------------------------------------------
usr/config$ ddns
The dynamic DNS service information and configuration
Usage:
ddns [-print][-enable used][-server Address][-hostname Name][-id Account]
[-passwd Password][-checkip used][-checkipsrv Address][-delay time]
[-force IP]
ddns -print Display Dynamic DNS information and configuration.
-enable Use the dynamic DNS service(0=Disable, 1=Enabled).
-server Specify DDNS server address.
-hostname Registered domain name.
-id Registered account ID.
-passwd Registered account password.
-checkip Check the host current IP address(0=Disable, 1=Enabled).
-checkipsrv1 Specify IP address check server.
-checkipsrv2 Specify secondary IP address check server.
-delay Setting the service delay time (1~59 minutes or 1~24 horus).
-force Force execute the dynamic DNS service.
103