User manual

User Manual
FXS Gateway Overview
-close Disconnect PPPoE connection.
-id Connection user name.
-pwd Connection password.
-reboot Reboot after remote host disconnection.
-echo PPPoE Echo Request (0=disable, 1=enable).
usr/config$
Figure 21-24 pppoe command list
Parameter Usages:
-print: print PPPoE status.
-dev: Enable PPPoE Dial-up function
-open: Open the connection
-close: Close the connection
-id: Input the User name ID provided by ISP
-pwd: Input the User name password provided by ISP
-reboot: Reboot the PPPoE connection.
-echo: Enable or Disable PPPoE echo request function.
For example:
usr/config$ pppoe -print
PPPoE adapter information
Device : Enabled
Status : Not initialized
User name : pppoe
Password : *****
Reboot : No
Echo : Enable
usr/config$
Figure 21-25 pppoe –print command list
21.7.11 [sysconf]
This command displays system information and configurations.
usr/config$ sysconf
System information and configuration
Usage:
sysconf [-print] [-idtime digit] [-bf digit] [-keypad dtmf]
- 88 -