User manual

User Manual
FXS Gateway Overview
means to drop e.164 number when dialing out.
--inert: Insert digits.(1~10 digits)
usr/config$ pbook –add name test e164 100 ip 192.168.13.78
-modify: modify an existing record. When using this command, users have to specify
the record’s index number, and then make the change.
usr/config$ pbook –modify 1 name test e164 5678 ip 192.168.1.10 port 1730
drop 0
-delete: delete a specific record. [pbook –delete 3] means delete index 3 record.
usr/config$ pbook –delete 3
PhoneBook Rules:
The e164 number defined in phone book will fully carry to destination. It is not just
a representative number for destination’s IP Address. In other words, user dial this
e164 number to reach destination, destination will receive the number and find out if it
is matched to its e164, including Line number in some particular device.
For example:
usr/config$ pbook -print
index Name IP E164 Port
========================================================
1 74 192.168.13.74 74
--------------------------------------------------------
usr/config$
Figure 21-23 pbook -print command
21.7.10 [pppoe]
Display PPPoE related information.
usr/config$ pppoe
PPPoE device information and configuration
Usage:
pppoe [-print]|[-open]|[-close]
pppoe [-dev on/off][-id username][-pwd password]
-print Display PPPoE device information.
-dev Enable(=1) or Disable(=0) device.
-open Open PPPoE connection.
- 87 -