User manual

User Manual
FXS Gateway Overview
-search Search an record in phonebook.
-delete Delete an record from phonebook.
-insert Insert an record to phonebook in specified position.
-modify Modify an exist record.
Note:
If parameter 'end_record' is omited, only record 'start_record' will be disp
lay.
If both parameters 'end_record' and 'start_record' are omited, all records
will be display.
Range of ip address setting (0.0.0.0 ~ 255.255.255.255).
Range of index setting value (1~100),
Example:
pbook -print 1 10
pbook -print 1
pbook -print
pbook -add name Test ip 210.59.163.202 e164 1001
pbook -insert 3 name Test ip 210.59.163.202 e164 1001
pbook -delete 3
pbook -search ip 192.168.4.99
pbook -modify 3 name Test ip 210.59.163.202 e164 1001
usr/config$
Figure 21-22 pbook command list
Parameter Usages:
-print: Print out current contents of Phone Book. Users can also add index number,
from 1 to 100, to the parameter to show specific phone number.
Note:
Index number: means the sequence number in phone book. If users do
request a specific index number in phone book, Gateway will give each record a
automatic sequence number as index.
-add: add a new record to phone book. When adding a record, users have to specify
name, IP, and e164 number to complete the command.
--name: Name to represent caller.
--e164: e.164 number for mapping with IP address of caller
--ip: IP address of caller
--port: Call signal port number of caller
--drop : Drop e.164 number when dial out. 0 means to keep e.164 number, 1
- 86 -