User manual

User Manual
FXS Gateway Overview
Command DESCRIPTION
pbook Phonebook information and configuration.
pppoe PPPoE stack manipulation.
sysconf System information manipulation.
Pro Pro information manipulation.
sip This command is to configure SIP related parameters.
security This command is used to configure the account information
included username and password obtained from the service
provider.
voice Voice information manipulation.
support Special Voice function support manipulation.
tos TOS service allows users to achieve QoS on IP network.
phone Setup of call progress tones and ringing (SLIC control).
bureau To set Hotline function must be under Peer-to-Peer mode and
switch to hotline mode.
rom ROM file update.
auth Set configuration items for "administrator" user.
passwd Password setting information and configuration.
line Line information manipulation
prefix Prefix drop/insert information manipulation
21.7 System Commands Overview
21.7.1 [quit]
Type [quit] will quit the Gateway configuration mode. And turn back to login
prompt.
usr/config$ quit
Disconnecting..
login: root
Welcome to Terminal Configuration Mode
Please enter your configuration item
usr/config$
Figure 21-11 quit command
Note:
It is recommanded that type the [quit] command before you leave the console. If
- 78 -