User manual

User Manual
FXS Gateway Overview
Chapter 11
Phone Configuration Screen
This Chapter covers FXS Gateway progress tone is configurable.
Default tone value is set according to U.S. tone specification. Users may adjust the
values according to their own country’s tone specification or users-defined tone
specification.
11.1 Phone Configuration Overview
The Web Management Interface provides [Phone Configuration] screen.
11.2 Phone Configuration Screen
Click [Phone Configuration] in the navigation panel and open the [Phone
Configuration] Screen.
Figure 11-1 Phone Pattern
The following table describes this screen.
Table 11-1 Phone Configuration
LABEL DESCRIPTION
Ring Tone Setting the played tone type, when FXS Gateway is receiving a
call.
Ring Back Tone Setting the played tone type, when FXS Gateway receives a Q.931
Alerting message. In condition that FXS Gateway is the originate
side.
Busy Tone Setting the played tone type, when destination is busy.
Dial Tone Setting the played tone type, when hook off a phone set of
- 43 -