User manual

User Manual
FXS Gateway Overview
 Two/Four RJ11 Telephone Port (FXS).
 DC 12V input.
 System Monitoring
 System status (Link, Ready, Status, TEL, Power).
 Remote Firmware Upgrade
You can use FTP/TFTP to perform configuration backup/restore and firmware upgrade
for the FXS Gateway from a remote location.
 Security
 Password protection for system management
 VLAN
1.3 Default Settings
The following are the settings of the defualt profile
Dynamix DW - FXS gateway has two accounts to let user configure the settings.
One is root, another is administrator. The difference between root and
administrator is that the administrator cannot configure the SIP Configuration and
Upgrade 2M version firmware.
 Login: root (or administrator)
 Password: Null (default)
1.3.1 IP Parameters
 IP Address = 10.1.1.3
 Subnet mask = 255.0.0.0
 Default gateway = 10.1.1.254
1.3.2 Telnet and Web Login Password
 Login = root
 Password = Null (default)
1.4 Front Panels
The LEDs on the front panel indicate the operational status of the Gateway.
Figure 1-1Dynamix DW – FXS 02 Gateway Front Panel
Figure 1-2 Dynamix DW - FXS 2A Gateway Front Panel
- 3 -