User manual

User Manual
FXS Gateway Overview
sr/config$ passwd -clean
Please wait a moment!!
Clean password OK.
usr/config$
Figure 21-54 passwd –clean command
21.7.22 [line]
User can use [line] command to check the registered status, it only useful for
proxy mode.
usr/config$ line
Gateway line information and configuration
Usage:
line -print Gateway line information.
Example:
line -print
Figure 21- 55 line command List
Parameter Usages:
–print: Check the line status
For example:
usr/config$ line -print
Line information and configuration
Line Reg. Status
=================
1 No Ready
2 No Ready
3 No Ready
4 No Ready
Figure 21-56 line -print command
- 110 -