User manual

User Manual
FXS Gateway Overview
Parameter Usages:
-print: show versions of all rom files.
-app, boot, boot2m, dsptest, dspcore, dspapp, ht: To update main Application program
code, Boot code, DSP testing code, DSP kernel code, or DSP application
code, and Hold Tone file.
Note:
Most of all, the Rom file needed to get upgrade is App or Boot2m. Please
check the exactly Rom file before doing download procedure.
-s: To specify TFTP server’s IP address when upgrading ROM files.
-f: To specify the target file name, which will replace the old one.
-method: To decide using TFTP or FTP as file transfer server. [0] stands for TFTP,
while [1] stands for FTP.
-ftp: If users choose FTP in above item, it is necessary to specify pre-defined
username and password when upgrading files.
For example:
usr/config$ rom –print
Download Method : TFTP
Boot Rom : sdboot.200
Application Rom : 4asip0519.BIN
DSP App : 48302ce3.140
DSP Kernel : 48302ck.140
DSP Test Code : 483cbit.bin
Hold Tone : holdtone.101
usr/config$
Figure 21-49 rom –print command list
21.7.20 [auth]
For security concern, the “root” user can customize some configurable items for
“administrator” user.
usr/config$ auth
Root control what command administrator can use.
Usage:
auth -print Display auth switch configuration.
Use item name to do config name (0=Disable, 1=Enabled).
Example: auth -ifaddr 1
usr/config$
- 107 -