User manual

User Manual
FXS Gateway Overview
21.7.17 [phone]
Gateway progress tone is configurable. Default tone value is set according to U.S.
tone specification. Users may adjust the values according to their own country’s tone
specification or users-defined tone specification.
usr/config$ phone
Phone ringing , ringback tone , busy tone , dial tone setting and notes
Usage:
phone [-ring [freq ] [ringON ] [ringOFF ] [ringLevel]]
[-rbt [freqHi ] [freqLo ] [freqHiLev] [freqLoLev]
[Tone1ON] [Tone1OFF] [Tone2ON ] [Tone2OFF ]]
[-bt [freqHi ] [freqLo ] [freqHiLev] [freqLoLev]
[Tone1ON] [Tone1OFF] [Tone2ON ] [Tone2OFF ]]
[-dt [freqHi ] [freqLo ] [freqHiLev] [freqLoLev]
[Tone1ON] [Tone1OFF] [Tone2ON ] [Tone2OFF ]]
[-flash [freqLo ] [freqHi ]]
[-level [loopCurrentLevel] [onhookLineVoltageLevel ]]
phone [-print [ring]|[rbt]|[bt]|[dt]|[flash]]
-print Display phone ringing/tone configuration.
ring : ringing
rbt : ringback tone
bt : busy tone
dt : dial tone
Note:
flash: flash tone
-ring ringing configuration set .
-rbt ringback tone configuration set .
-bt busy tone configuration set .
-dt dial tone configuration set .
-flash flash configuration set .
-level Loop Current and On-Hook Line Voltage level set .
ringing frequency : 15 ~ 100 (Unit : Hz)
ringing ring ON/OFF : 0 ~ 8000 (Unit : ms)
- 101 -