User manual

User Manual
FXS Gateway Overview
-mode Configure as Peer-to-Peer mode:0/Proxy mode:1/Gateway
mode:2.
-px Primary Proxy server address. (IPv4 address or dns name)
-px2 Secondary Proxy server address. (IPv4 address or dns name)
-pxport Primary Proxy server port. (the port of Primary proxy)
-px2port Secondary Proxy server port. (the port of Secondary proxy)
-outpx OutBound Proxy server address. (IPv4 address or dns name)
-outpxport OutBound Proxy server port. (the port of OutBound proxy)
-prefix Specify prefix string, use it when UserID contains alphabets
(if UserID uses numerals, specify as null)
-line1 TEL1 Phone number.
-line2 TEL2 Phone number.
-line3 TEL3 Phone number.
-line4 TEL4 Phone number.
-pbsearch Search phone book 0:off/1:on.
-expire The relative time after which the message expires(0 ~ (2^31-1))
-port SIP local UDP port number (2326~65534), Default: 5060
-rtp RTP port number (2326~65534), Default: 16384
Example:
sip -mode 1
sip -px 210.59.163.171 -line1 70 -line2 71 -line3 72 -line4 73
usr/config$
Figure 21-28 sip command list
Parameter Usages:
-mode: Configure as Proxy mode or Peer-to-Peer mode (0: Peer-to-Peer mode, 1:
Proxy mode, Gateway Mode).
-px: to specify Proxy address when FXS Gateway is in proxy mode. Proxy address can
be IPv4 address or DNS name.
-px2: to setting Secondary Proxy server address. Proxy address can be IPv4 address
or DNS name.
-pxport: Set Proxy port for SIP-Phone to send message, default value is 5060, if there
is no special request of Proxy server, please don’t change this value.
-px2port: Set 2
nd
Proxy port for SIP-Phone to send message, default value is 5060, if
there is no special request of Proxy server, please don’t change this value.
-outpx: Set IP Address or URL address (Domain Name Server must be configured.
Please refer to Network Configure) of outbound Proxy server.
- 92 -