User manual

User Manual
FXS Gateway Overview
For example:
usr/config$ sysconf -print
System information
Gateway Service : 0
Inter-Digits time : 3
BusyForward : OFF
Keypad DTMF type : In-band
End of Dial Digit : #
Caller ID Type : x
DTMF Caller ID Start Symbol : D
DTMF Caller ID End Symbol : C
RFC2833 Payload Type : 96
FAX Payload Type : 101
Disconnect Supervision : OFF
Loop Current Drop Time(ms) : 500
user=phone parameter : ON
IVR Auto Hang up : Disable
Billing Sig Mode : None
Transfer Mode : Enable
SIP port assigning manner : Disable
Billing Method Mode : Only Once
usr/config$
Figure 21-27 sysconf -print command
21.7.12 [sip]
This command is to configure SIP related parameters.
usr/config$ sip
SIP stack information and configuration
Usage:
sip [-print] [-mode pxmode] [-outpx IPaddmress][-transport type]
sip [-px address] [-px2 address] [-pxport number] [-outpxport number]
[-line1 number] [-line2 number] [-line3 number] [-line4 number]
[-prefix prefixstring] [-expire t1] [-port udpPort] [-rtp rtpPort]
sip -print
-print Display SIP stack information and configuration.
- 91 -