User`s manual

Dynamix DW-01Plus/S Gateway User Manual
- 92 -
-dspapp update DSP application code(optional)
-s IP address of TFTP/FTP server (mandatory)
-f file name(mandatory)
-method download via TFTP/FTP (TFTP: mode=0, FTP: mode=1)
-ftp specify username and password for FTP
-server specify EMS Server IP address
Note:
This command can run select one option in 'app', 'boot',
, 'dsptest', 'dspcore', and 'dspapp'.
Example:
rom -method 1
rom -ftp vwusr vwusr
rom -app -s 192.168.4.101 -f app.bin
usr/config
Parameter Usages:
-print: show versions of all rom files.
-app, boot, boot2m, dsptest, dspcore, dspapp, ht: To update main Application
program code, Boot code, DSP testing code, DSP kernel code, or DSP application
code, and Hold Tone file.
Note:
Most of all, the Rom file needed to get upgrade is App or Boot2m. Please check
the exactly Rom file before doing download procedure.
-s: To specify TFTP server’s IP address when upgrading ROM files.
-f: To specify the target file name, which will replace the old one.
-method: To decide using TFTP or FTP as file transfer server. [0] stands for TFTP,
while [1] stands for FTP.
-ftp: If users choose FTP in above item, it is necessary to specify pre-defined
username and password when upgrading files.
- server: specify EMS Server IP address. Provide auto upgrade rom application
verion, but you must use EMS Server it work.
For example:
usr/config$ rom -print
Download Method : TFTP
Boot Rom : sdboot.200