User`s manual

Dynamix DW-01Plus/S Gateway User Manual
- 85 -
support -print
-t38 T.38(FAX) enabled/disabled.
-busy Busy Forward number.(if empty, please fill "null")
-noanswer No Anser Forward number.(if empty, please fill "null")
-uncon Unconditional Forward number.(if empty, please fill "null")
Example:
support -t38 1
support -busy 1001
support -uncon null
usr/config$
Parameter Usages:
-print: print current settings in support command.
-t38: Enable or disable T.38 fax ability. The function is will automatically defer
codec (G.723 or G.729a) to T.38 when FAX signal is detected.
-busy: Provide setting busy forwrd to other number, when you setting this function.
Then this channel busy, auto forward to setting phone number.
-noanswer: Provide setting noanser forwrd to other number, when you setting this
function. Then this channel not answer, auto forward to setting phone number.
-uncon: Provide setting noanser forwrd to other number, when you setting this
function. Then all call this channel number, will all auto forward to setting phone
number.
Note:
It is not recommended to change the value in this command, o
nly if users do know
well the application. This might cause incompatibility with other devices.
For example:
usr/config$ support -print
Special Voice function support manipulation
T.38(FAX) support : Disabled
Forward Numbers
Busy Forward number: 0123456789
NoAnswer Forward number: 0212345678
Uncondition Forward number:
usr/config$