User`s manual

Dynamix DW-01Plus/S Gateway User Manual

- 76 -

Note:

This command will clean the configuration stored in

the flash and reboot it.

usr/config$

Parameter Usages:

-clean: clean all the user defined value, and reboot Gateway in factory default

mode.

Note:

1. It is recommended to execute [flash –

clean] after application firmware been

upgraded.

2. Only User who login with root can execute it

. After flash clean, all

configurations in command [ifaddr] and [pppoe] will still be kept.

For example:

usr/config$ flash -clean

Flash clean start

Flash clean success!!

!! rebooting ...

Attached TCP/IP interface to cpm unit 0

Attaching interface lo0...done

HTTPD initialized...

Flash Check

WorkMode : PROXY_MODE

Start registering to Proxy server

AC4804[0] is ok

AC4804[1] is ok

successful 2 2

Initialize OSS libraries...OK!

VP v1.42 stack open successfully.