User`s manual

Dynamix DW-01Plus/S Gateway User Manual
- 51 -
4.3.6 Phone Configuration Screen
Click [Phone Configuration] in the navigation panel and open the [Phone Configuration]
Screen. For tone simulation, Dynamix DW-01Plus/S Gateway adopts dual frequencies
as traditional telephone does. If users want to have their own call progress tone, they
can change the value of tones.
- Ring Tone: Set Ring frequency, on time, off time, voltage level. Dynamix
DW-01Plus/S will give ring to phone set to trigger ring. If user found that phone
set cannot ring when having incoming call, please try to increase ring frequency
here.
 ringing frequency: 15 ~ 100 (Unit: Hz)
 ringing ring ON/OFF: 0 ~ 8000 (Unit: ms)
 ringing level: 0 ~ 94 (Unit: V)
 tone frequency: 0 ~ 65535 (Unit: Hz)
 tone freqLevel: 0 ~ 65535 (Unit: mVrms)
 tone Tone ON/OFF: 0 ~ 8000 (Unit: ms)
- Ring Back Tone: Set ring back tone parameters.
- Busy Tone: Set busy tone parameters.
- Dial tone: Set Dial tone parameters.
 Low(frq) : Frequency value of Low frequency
 High(frq) : Frequency value of High frequency